Science and Technology

Young budding geniuses will experiment an out-of-the-ordinary digital fabrication project that will spark their creativity, develop their digital fabrication skills, cultivate their problem-solving skills, and spark their interest in one day becoming tech creators. This user-friendly kit contains all the parts needed to print and assemble one (1) ULIO 3D STEAM printer. Important Notice: This project requires access to an existing 3D printer capable of printing at least 20 x 16.5 x 20 cm (8" x 6.3" x 8"). Adult supervision and assistance are required. The ULIO 3D STEAM kit contains the following materials: • Set of a microcontroller with LCD display (pre-assembled, pre-wired and pre-configured) • Set of a 1.75 mm hot nozzle (pre-assembled and pre-wired) • Extruder set (pre-assembled) • Set of a magnetic printing bed • Set of pre-printed parts • Four (4) stepper motors (NEMA 17) • Three (3) limit switches • Two (2) smooth rods and one (1) threaded rod • One (1) flexible connector and four (4) ball bearings • One (1) Bowden tube • One 24 VDC power supply unit • Hardware set (bolts, nuts and screws) • An instruction manual in paper format • A sample of PLA filament • An SD card (including STL files) • Miscellaneous accessories Specifications: • Printing technology: FDM • Approximate print volume: 10 x 10 x 5.5 cm (3.9" x 3.9" x 2") • Approximate print resolution: 250 microns • Approximate speed: 30 mm/s • Approximate physical dimensions: 7.5" x 7.25" x 13.5" • Hot nozzle diameter: 0.4 mm • Connectivity: USB • 3rd party printing software: PrusaSlicer • Third-party firmware: Marlin • Operating system compatibility: Windows and Mac • File type: STL, OBJ, Gcode • Requires one roll of filament (1 kg) • Default safety features: • Stainless steel hotend enclosure • High-temperature limit switch • Software thermal runaway protection • Steel plate printbed

TINKA, the electrifying ladybug!

● Dimensions are 20 x 25 x 20 cm. ● Build plate is 110 °C and higher and is made of borosilicate glass print bed with replaceable print surface. ● Filament feed is direct (non-Bowden). ● Includes a 0.35 mm brass nozzle with a temperature of 180 - 300 °C. ● Maximum extruding temperature is 40 W rated at 300 °C. ● Uses FFF (Fused Filament Fabrication) print technology. ● Layer resolution is smaller than 50 microns to 0.25 mm with a 0.35 mm nozzle. ● Print head travels at a speed of 80-200 mm/sec, for best print quality. ● Operating sound is < 65 dBA. ● SD card reader and USB connection to the computer. Includes MakerGear M2e printer with V4 hot end, power supply with adjustable input voltage (115 V or 230 V), power cord, 1 kg spool of black PLA, 20.3 x 25.4 cm build plate, roll of 5 cm replacement printing film, tool set, sample prints made by your M2, SD card with sample prints, and user guide.

Use the magic of chromatography to extract telltale colours from a crime scene (like DNA analysis). Special indicators to identify dangerous acids and alkalis. Learn how to make fingerprints stand out with special glow-in-the-dark powders and inks. Trap thieves with invisible markers that only you can see. Make casts of prints at a crime scene and compare them to your database. Who was driving the fugitive's car? You will find out from fiber analysis. Set includes: baking soda, diluted rice vinegar, plaster of Paris, corn starch, 8 universal Indicator Strips, beaker, pipette, 3 spoons, tweezers, magnifying glass, 2 water-based marker pens, cylinder, chromatography paper, UV flashlight and invisible ink, marker pen, 5 Mixing sticks, fingerprint coverslips, impression mold, 6 racing papers, 10 cotton balls, 4 cotton swabs, ink pad, sticky notes, tape, pencil, sample tubes x5, 3 meters of crime scene tape, instruction booklet and safety notice.

Simple, fun robotics projects will keep students busy learning. Powered by Micro:Bit, K8 is easily shareable among students, and simple and fun to assemble. Drive K8 with two independently controlled DC motors. The robot can see and follow a line with an Ultrasonic Sensor and three Infrared Sensors. Remote control your K8 robot using Bluetooth. Micro:Bit not included

ULIO 3D Brix is a buildable 3D printer made out of plastic bricks.

ELECFREAKS Starter Set for Micro:Bit

An impressive set with over 160 parts. Students use the Touch and Robotics boards to follow one of the programming Arduino guides, or create their own code from scratch or even design wearable technology using conductive thread. Includes Crazy Circuits chips, 5 Touch Boards and USB cables, 3 robotics boards and USB cables, 5 blink/fade boards, standard and jumbo push buttons, 5 slide switches, 5 coin cell battery holders, jumbo 10 mm, mini surface mount, brick and mini LEDs, 5 piezoelectric speakers, 10 screw terminals, 10 rolls of conductive nylon tape (3.17 mm x 5 m), 5 bobbins of conductive thread (5 m), 10 alligator clips, 50 CR2032 batteries, 5 2AAA battery holders, 3 standard servo motors, 6 continuous rotation servo motors, 10 LEGO® compatible servo brackets, 10 LEGO® compatible servo horns, 10 LEGO® baseplate (8 x16 studs), and plastic organizer.

Thin, ultra-strong, machine-washable stainless steel and nylon thread is great for soft circuits and wearable projects, such as light-up bracelets, t-shirts, ties, and sock puppets. Resistance of 28 ohm per 30 cm. 5 m.

Students learn the fundamentals of Arduino programming and create robots or interactive displays using the provided servo motors. The included robotics board allows for the easy addition of any sensor without the need for a breadboard or soldering. Includes Crazy Circuits chips, 2 robotics boards and USB cables, 4 standard push buttons, 5 jumbo 10 mm LEDs, piezoelectric speaker, 2 screw terminals, conductive nylon tape (3.17 mm x 5 m), 2 standard servo motors, 2 continuous rotation servo motors, 4 LEGO® compatible servo brackets, 4 LEGO® compatible servo horns, LEGO® baseplate (8 x 16 studs), and plastic organizer.

Find the right way with this real working compass set. Features a mirror on the back to signal with. Includes a carabiner to help stow gear (up to 10kg). Made from plant-based plastic (non-oil-based).

This 2 kg scale comes with a clear bowl which is ideal for weighing multiple small objects at once. Easy to use. Large display screen. Capacity 4.4lbs/ 2 kg in 1/8 oz/1 g increments. 4 AA batteries included.

These 78 dry-erase magnetic tiles have everything you need to teach common electrical circuit symbols, sort the components of a circuit, and construct full circuit diagrams (series and parallel). Set includes a teacher's guide with activities.

Lightweight and durable physical and political globe with strong, scratch-resistant smoke black plastic base and semi-meridian. Features blue oceans, raised relief, and more than 4,000 names and borders of countries, cities, oceans, rivers, etc. ø 30.4 cm. French edition.

The Bit Board Rover combines the popular brick brand and Micro:Bit into an amazing robotics platform.